I am going to pin it and think about doing this one. The only part of the dressers that are sub par in quality are the bottoms of the drawers. The 3 drawer IVAR dressers are the deeper ones. This week we started in. Thanks Carol. If it helps, the center section with the drawers are essentially the same width as the IVAR or TARVA. I’ve actually been thinking about updating the post with my final dimensions. they don’t have a backing correct? They don’t charge for this so don’t assume that you need to find a friend with a truck or rent one to complete a project like this. Definitely pinning this, Hannah. These shelves were for his shoes and are spaced 8 3/4″” apart except for the bottom shelf that was designed for boots and is a little bit taller at 12″. This is so gorgeous! I’m so new to this but I’ve been dying to make my closet mine. If you are on Instagram I’d be happy to provide feedback on the layout if you send me a DM with some pictures of your space. Can you mention the dimensions you had to work with? Do you think this type is ok: https://www.homedepot.com/p/Cabinet-Grade-Plywood-Panel-Common-23-32-in-x-4-ft-x-8-ft-Actual-0-688-in-x-48-in-x-96-in-1077486/302610611, Thanks Pat! I’m scared to tackle this project alone but your directions are so clear. It’s a waste of time and paint! We went to IKEA and couldn’t find the three drawer IVAR bureau. Beautiful and well done! I have 2 questions what type of plywood did you use? If you have any questions along the way the fastest way to get in touch with me is a DM through instagram. I totally forgot to take a picture of the closet with the trim installed before I painted but here is a lovely picture of me after sanding the closet and prepping it for paint. Do you mean that it sticks out 12″ towards the top of the wall? BUT it’s coming together great! I negotiated to $200 for two pieces of Henredon case goods. Curious what you’d recommend doing if you have carpet in your closet. Find a wide range of dresser drawers with two to eight drawers, built-in mirrors and more. I can’t remember the color off the top of my head but it’s listed in the post. February 25, 2019 By //  by Hannah 124 Comments. Each box is also screwed into studs in the ceiling so they aren’t going anywhere! I can’t thank you enough for sharing. Hope that helps. Thanks I designed his side to have space to hang his long sleeve shirts and polos in the corner and then space to hang his sweaters above the IVAR dresser. You should have studs at 16″ on center so as long as your boxes are larger than that you should hit a stud at some point. 5 Takeaways From My First Time Hanging Wallpaper, DIY Pull-out Cabinet For Dog Food Storage, DIY Small Parts Organizer Using IKEA REJSA Boxes, https://www.homedepot.com/b/Building-Materials-Building-Hardware-Corner-Braces/N-5yc1vZc8hr/Ntk-Extended/Ntt-simpson+strong-tie?Ntx=mode+matchpartialmax&NCNI-5&storeSelection=3868,3823,3813,3844,3861, https://www.homedepot.com/b/Lumber-Composites-Plywood-Hardwood-Plywood/N-5yc1vZc7r1, https://www.homedepot.com/p/3-4-in-x-4-ft-x-8-ft-MDF-Panel-D11612490970000/304325742. I didn’t list quantities or provide a cut list because everyone’s closet will be different dimensions. Shelves Included: No; Drawers … It was a side project for us while we were renovating other parts of our home so it took about a year from start to finish. You’ll love it. I went with the paint and primer mix (the ultra). We have started in on the project – which I’ve had saved for months. Shop IKEA instore or online today! Will do. We did not want to spend a ton of money and we kept coming back to your design and jumped into the project last weekend. Then attach the handles with the hardware that came with them. Thanks again Hannah and good luck with your project Megan! Yes, I just attached 1×2 boards to trim out the 3/4″ plywood shelves. What I mean is that I didn’t put the 1/4″ plywood sheet on the walls to the left and right of the tarva because there would have been 3/4″ material covering it in the end where the shelves need to be screwed in. Kippi. It was Behr semi gloss paint. To do this we first built shelves that fit the space and had 1×2 trim on the front face. Great job and an amazing color choice, looks fresh and elegant. To solve this problem we bought 24″ x 36″ x 3/4″ craft boards and cut them to size. Your Kregjig should have a guide. Steel Frame and Wood Top, Light Grey 4.3 out of 5 stars 233 $54.99 $ 54. Thank you Melissa! At first, I was thinking of cutting my ‘walls’ to 80” and the top would give us a 12” shelf between the top and the ceiling, but not sure that would be study enough. Looks like it’s 42 a 5/8” without the bottom legs. what size Kreg screws did you use for the shelves? This is amazing. The last step is to move your clothes and shoes in! And here is his side with all of the shoe shelves installed. Great solution for storage and eliminates the need for a stand alone dresser. Install hanging rods in sections where you want to hang clothes. I’ve printed them using google chrome as a browser. Absolutely love it!! It met most of our criteria except that it lacked was a proper master suite. After you build the dressers and get them aligned properly on your base attach them to the wall using the IKEA hardware. Me and my wife just finished out closet and it turned out great. Simpson strongtie makes a bunch of corner brackets that would work well. Amazing closet I would love to have one just like it. If you would like to save this post for later you can pin it below. Hopefully that makes sense. I’d love to see your finished closet. Need Password for Free Resource Library? I can’t wait to see your finished beautiful closet! Bummer! I am SO thankful you shared- I am now beginning construction on my own closet and your build is absolutely the BEST I have seen for inspiration. you’ll also want to account for the 1/4″ plywood wall backing so the boxes should be 1″ shallower than the IKEA dresser (1/4″ for the wall backing + 3/4″ for the face trim). Hi Amy. Did you measure 2” down from the bottom of the shelf to the top of the rod? Then, use the paint color of your choice and apply at least 2 coats. I tried to print your article but photos didn’t appear. So essentially it’s a 1×2 attached to a single 3/4″ piece of plywood. Hi Sarah. I’ve heard of them and have friends that have used them. I have been trying to get my closet life together for at least three years. I actually had to do 3 in some areas. Congrats on the beautiful work! My closet is approximately 80″ deep x 100″ wide. This thing isn’t going anywhere! I just wanted to know how you finished the intersection of the 2 pieces of trim. Thank you so much for posting this. Have you thought any more about adding the final dimensions to the post? Bring your ideas to life with rewards, inspiration, discounts and a few surprises along the way. This is probably the easiest way to do it. Our master suite remodel is the biggest DIY/renovation project that we’ve taken on but I’m so glad that we did it. The new top for the Ivar is screwed i to the side walls of the boxes that I built. Here is a link that may help https://www.homedepot.com/b/Building-Materials-Building-Hardware-Corner-Braces/N-5yc1vZc8hr/Ntk-Extended/Ntt-simpson+strong-tie?Ntx=mode+matchpartialmax&NCNI-5&storeSelection=3868,3823,3813,3844,3861 Good luck and stay safe! I would recommend hanging your clothes on a hanger and testing it first before you install them. Beautiful closet! This picture is of one of the lumber hauls. You’ll want the depth of the craft board to match the front of the IVAR dresser so it should be 3/4″ deeper than the walls of the boxes that you built.

Pulsating Humming Noise In House, Black Locust Furniture, Treacle Meaning In Tamil, Spread Cheese Recipes, Dining Table Nz, Vegan Mustard Dip For Pretzels, Modular Sectional Couch, Bush Business Furniture Series C Elite, Mt Tabor Volcano, Nike Air Zoom Spiridon Cage 2 White University Blue, Tall Corner Shelf Metal,